wezterm

config/.config/aerc/accounts.conf

@@ -0,0 +1,35 @@
+[mchalupiak]
+source        = imaps://mikec@mail.mchalupiak.com
+outgoing      = smtp://mikec%40mchalupiak.com@www.mchalupiak.com
+default       = INBOX
+from          = Michael Chalupiak <mikec@mchalupiak.com>
+cache-headers = true
+source-cred-cmd   = pass mikec@mchalupiak.com
+outgoing-cred-cmd = pass mikec@mchalupiak.com
+
+[mikecchalupiak]
+source            = imaps+xoauth2://mikecchalupiak%40outlook.com@outlook.office365.com?
+outgoing          = smtp+xoauth2://mikecchalupiak%40outlook.com@outlook.office365.com:587
+from              = "Michael Chalupiak" <mikecchalupiak@outlook.com>
+default           = INBOX
+cache-headers     = true
+source-cred-cmd   = oama access mikecchalupiak@outlook.com
+outgoing-cred-cmd = oama access mikecchalupiak@outlook.com
+
+[spamreciver1]
+source            = imaps+xoauth2://spamreciver1%40outlook.com@outlook.office365.com?
+outgoing          = smtp+xoauth2://spamreciver1%40outlook.com@outlook.office365.com:587
+from              = "Mike Jeff" <spamreciver1@outlook.com>
+default           = INBOX
+cache-headers     = true
+source-cred-cmd   = oama access spamreciver1@outlook.com
+outgoing-cred-cmd = oama access spamreciver1@outlook.com
+
+[chalupmc]
+source            = imaps+xoauth2://chalupmc%40rose-hulman.edu@outlook.office365.com?
+outgoing          = smtp+xoauth2://chalupmc%40rose-hulman.edu@outlook.office365.com:587
+from              = "Michael Chalupiak" <chalupmc@rose-hulman.edu>
+default           = INBOX
+cache-headers     = true
+source-cred-cmd   = oama access chalupmc@rose-hulman.edu
+outgoing-cred-cmd = oama access chalupmc@rose-hulman.edu

config/.config/aerc/aerc.conf

@@ -0,0 +1,862 @@
+#
+# aerc main configuration
+
+[general]
+#
+# Used as a default path for save operations if no other path is specified.
+# ~ is expanded to the current user home dir.
+#
+#default-save-path=
+
+# If set to "gpg", aerc will use system gpg binary and keystore for all crypto
+# operations. If set to "internal", the internal openpgp keyring will be used.
+# If set to "auto", the system gpg will be preferred unless the internal
+# keyring already exists, in which case the latter will be used.
+#
+# Default: auto
+#pgp-provider=auto
+
+# By default, the file permissions of accounts.conf must be restrictive and
+# only allow reading by the file owner (0600). Set this option to true to
+# ignore this permission check. Use this with care as it may expose your
+# credentials.
+#
+# Default: false
+#unsafe-accounts-conf=false
+
+# Output log messages to specified file. A path starting with ~/ is expanded to
+# the user home dir. When redirecting aerc's output to a file using > shell
+# redirection, this setting is ignored and log messages are printed to stdout.
+#
+#log-file=
+
+# Only log messages above the specified level to log-file. Supported levels
+# are: trace, debug, info, warn and error. When redirecting aerc's output to
+# a file using > shell redirection, this setting is ignored and the log level
+# is forced to trace.
+#
+# Default: info
+#log-level=info
+
+# Disable IPC entirely. Don't run commands (including mailto:... and mbox:...)
+# in an existing aerc instance, and don't start an IPC server to allow
+# subsequent aerc instances to run commands in the current one.
+#
+# Default: false
+#disable-ipc=false
+
+# Don't run mailto:... commands over IPC; start a new aerc instance with the
+# composer instead.
+#
+# Default: false
+#disable-ipc-mailto=false
+#
+# Don't run mbox:... commands over IPC; start a new aerc instance with the mbox
+# file instead.
+#
+# Default: false
+#disable-ipc-mbox=false
+
+# Set the $TERM environment variable used for the embedded terminal.
+#
+# Default: xterm-256color
+#term=xterm-256color
+
+# Display OSC8 strings in the embedded terminal
+#
+# Default: false
+#enable-osc8=false
+
+# Default shell command to use for :menu. This will be executed with sh -c and
+# will run in an popover dialog.
+#
+# Any occurrence of %f will be replaced by a temporary file path where the
+# command is expected to write output lines to be consumed by :menu. Otherwise,
+# the lines will be read from the command's standard output.
+#
+# Examples:
+#   default-menu-cmd=fzf
+#   default-menu-cmd=fzf --multi
+#   default-menu-cmd=dmenu -l 20
+#   default-menu-cmd=ranger --choosefiles=%f
+#
+#default-menu-cmd=
+
+[ui]
+#
+# Describes the format for each row in a mailbox view. This is a comma
+# separated list of column names with an optional align and width suffix. After
+# the column name, one of the '<' (left), ':' (center) or '>' (right) alignment
+# characters can be added (by default, left) followed by an optional width
+# specifier. The width is either an integer representing a fixed number of
+# characters, or a percentage between 1% and 99% representing a fraction of the
+# terminal width. It can also be one of the '*' (auto) or '=' (fit) special
+# width specifiers. Auto width columns will be equally attributed the remaining
+# terminal width. Fit width columns take the width of their contents. If no
+# width specifier is set, '*' is used by default.
+#
+# Default: flags:4,name<20%,subject,date>=
+#index-columns=flags:4,name<20%,subject,date>=
+
+#
+# Each name in index-columns must have a corresponding column-$name setting.
+# All column-$name settings accept golang text/template syntax. See
+# aerc-templates(7) for available template attributes and functions.
+#
+# Here are some examples to show the To field instead of the From field for
+# an email (modifying column-name):
+#
+# 1. a generic one
+#   column-name={{ .Peer | names | join ", " }}
+# 2. based upon the selected folder
+#   column-name={{if match .Folder "^(Gesendet|Sent)$"}}{{index (.To | names) 0}}{{else}}{{index (.From | names) 0}}{{end}}
+#
+# Default settings
+#column-flags={{.Flags | join ""}}
+#column-name={{index (.From | names) 0}}
+#column-subject={{.ThreadPrefix}}{{.Subject}}
+#column-date={{.DateAutoFormat .Date.Local}}
+
+#
+# String separator inserted between columns. When the column width specifier is
+# an exact number of characters, the separator is added to it (i.e. the exact
+# width will be fully available for the column contents).
+#
+# Default: "  "
+#column-separator="  "
+
+#
+# See time.Time#Format at https://godoc.org/time#Time.Format
+#
+# Default: 2006 Jan 02
+#timestamp-format=2006 Jan 02
+
+#
+# Index-only time format for messages that were received/sent today.
+# If this is empty, timestamp-format is used instead.
+#
+# Default: 15:04
+#this-day-time-format=15:04
+
+#
+# Index-only time format for messages that were received/sent within the last
+# 7 days. If this is empty, timestamp-format is used instead.
+#
+# Default: Jan 02
+#this-week-time-format=Jan 02
+
+#
+# Index-only time format for messages that were received/sent this year.
+# If this is empty, timestamp-format is used instead.
+#
+#Default: Jan 02
+#this-year-time-format=Jan 02
+
+#
+# Overrides timestamp-format for the message view.
+#
+# Default: 2006 Jan 02, 15:04 GMT-0700
+#message-view-timestamp-format=2006 Jan 02, 15:04 GMT-0700
+
+#
+# If set, overrides timestamp-format in the message view for messages
+# that were received/sent today.
+#
+#message-view-this-day-time-format=
+
+# If set, overrides timestamp-format in the message view for messages
+# that were received/sent within the last 7 days.
+#
+#message-view-this-week-time-format=
+
+#
+# If set, overrides *timestamp-format* in the message view for messages
+# that were received/sent this year.
+#
+#message-view-this-year-time-format=
+
+#
+# Width of the sidebar, including the border.
+#
+# Default: 22
+#sidebar-width=22
+
+#
+# Default split layout for message list tabs. The syntax is:
+#
+#       [<direction>] <size>
+#
+# <direction> is optional and defaults to horizontal. It can take one
+# of the following values: h, horiz, horizontal, v, vert, vertical.
+#
+# <size> is a positive integer representing the size (in terminal cells)
+# of the message list window.
+#
+#message-list-split=
+
+#
+# Message to display when viewing an empty folder.
+#
+# Default: (no messages)
+#empty-message=(no messages)
+
+# Message to display when no folders exists or are all filtered
+#
+# Default: (no folders)
+#empty-dirlist=(no folders)
+#
+# Value to set {{.Subject}} template to when subject is empty.
+#
+# Default: (no subject)
+#empty-subject=(no subject)
+
+# Enable mouse events in the ui, e.g. clicking and scrolling with the mousewheel
+#
+# Default: false
+#mouse-enabled=false
+
+#
+# Ring the bell when new messages are received
+#
+# Default: true
+#new-message-bell=true
+
+#
+# Template to use for Account tab titles
+#
+# Default: {{.Account}}
+#tab-title-account={{.Account}}
+
+#
+# Template to use for Composer tab titles
+#
+# Default: {{if .To}}to:{{index (.To | shortmboxes) 0}} {{end}}{{.SubjectBase}}
+#tab-title-composer={{if .To}}to:{{index (.To | shortmboxes) 0}} {{end}}{{.SubjectBase}}
+
+#
+# Template to use for Message Viewer tab titles
+#
+# Default: {{.Subject}}
+#tab-title-viewer={{.Subject}}
+
+
+# Marker to show before a pinned tab's name.
+#
+# Default: `
+#pinned-tab-marker='`'
+
+# Template for the left side of the directory list.
+# See aerc-templates(7) for all available fields and functions.
+#
+# Default: {{.Folder}}
+#dirlist-left={{.Folder}}
+
+# Template for the right side of the directory list.
+# See aerc-templates(7) for all available fields and functions.
+#
+# Default: {{if .Unread}}{{humanReadable .Unread}}{{end}}
+#dirlist-right={{if .Unread}}{{humanReadable .Unread}}{{end}}
+
+# Delay after which the messages are actually listed when entering a directory.
+# This avoids loading messages when skipping over folders and makes the UI more
+# responsive. If you do not want that, set it to 0s.
+#
+# Default: 200ms
+#dirlist-delay=200ms
+
+# Display the directory list as a foldable tree that allows to collapse and
+# expand the folders.
+#
+# Default: false
+#dirlist-tree=false
+
+# If dirlist-tree is enabled, set level at which folders are collapsed by
+# default. Set to 0 to disable.
+#
+# Default: 0
+#dirlist-collapse=0
+
+# List of space-separated criteria to sort the messages by, see *sort*
+# command in *aerc*(1) for reference. Prefixing a criterion with "-r "
+# reverses that criterion.
+#
+# Example: "from -r date"
+#
+#sort=
+
+# Moves to next message when the current message is deleted
+#
+# Default: true
+#next-message-on-delete=true
+
+# Automatically set the "seen" flag when a message is opened in the message
+# viewer.
+#
+# Default: true
+#auto-mark-read=true
+
+# The directories where the stylesets are stored. It takes a colon-separated
+# list of directories. If this is unset or if a styleset cannot be found, the
+# following paths will be used as a fallback in that order:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/stylesets
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/stylesets
+#   /usr/local/share/aerc/stylesets
+#   /usr/share/aerc/stylesets
+#
+#stylesets-dirs=
+
+# Uncomment to use box-drawing characters for vertical and horizontal borders.
+#
+# Default: "│" and "─"
+#border-char-vertical="│"
+#border-char-horizontal="─"
+
+# Sets the styleset to use for the aerc ui elements.
+#
+# Default: default
+#styleset-name=default
+
+# Activates fuzzy search in commands and their arguments: the typed string is
+# searched in the command or option in any position, and need not be
+# consecutive characters in the command or option.
+#
+# Default: false
+fuzzy-complete=true
+
+# How long to wait after the last input before auto-completion is triggered.
+#
+# Default: 250ms
+#completion-delay=250ms
+
+# The minimum required characters to allow auto-completion to be triggered after
+# completion-delay.
+#
+# Setting this to "manual" disables automatic completion, leaving only the
+# manually triggered completion with the $complete key (see aerc-binds(5) for
+# more details).
+#
+# Default: 1
+#completion-min-chars=1
+
+#
+# Global switch for completion popovers
+#
+# Default: true
+#completion-popovers=true
+
+# Uncomment to use UTF-8 symbols to indicate PGP status of messages
+#
+# Default: ASCII
+#icon-unencrypted=
+#icon-encrypted=✔
+#icon-signed=✔
+#icon-signed-encrypted=✔
+#icon-unknown=✘
+#icon-invalid=⚠
+
+# Reverses the order of the message list. By default, the message list is
+# ordered with the newest (highest UID) message on top. Reversing the order
+# will put the oldest (lowest UID) message on top. This can be useful in cases
+# where the backend does not support sorting.
+#
+# Default: false
+#reverse-msglist-order = false
+
+# Reverse display of the message threads. Default order is the initial
+# message is on the top with all the replies being displayed below. The
+# reverse option will put the initial message at the bottom with the
+# replies on top.
+#
+# Default: false
+#reverse-thread-order=false
+
+# Positions the cursor on the last message in the message list (at the
+# bottom of the view) when opening a new folder.
+#
+# Default: false
+#select-last-message=false
+
+# Sort the thread siblings according to the sort criteria for the messages. If
+# sort-thread-siblings is false, the thread siblings will be sorted based on
+# the message UID in ascending order. This option is only applicable for
+# client-side threading with a backend that enables sorting. Note that there's
+# a performance impact when sorting is activated.
+#
+# Default: false
+#sort-thread-siblings=false
+
+# Set the scroll offset in number of lines from the top and bottom of the
+# message list.
+#
+# Default: 0
+#msglist-scroll-offset = 0
+
+#
+# Enable a threaded view of messages. If this is not supported by the backend
+# (IMAP server or notmuch), threads will be built by the client.
+#
+# Default: false
+#threading-enabled=false
+
+# Force client-side thread building
+#
+# Default: false
+#force-client-threads=false
+
+# If no References nor In-Reply-To headers can be matched to build client side
+# threads, fallback to similar subjects.
+#
+# Default: false
+#threading-by-subject=false
+
+# Show thread context enables messages which do not match the current query (or
+# belong to the current mailbox) to be shown for context. These messages can be
+# styled separately using "msglist_thread_context" in a styleset. This feature
+# is not supported by all backends
+#
+# Default: false
+#show-thread-context=false
+
+# Debounce client-side thread building
+#
+# Default: 50ms
+#client-threads-delay=50ms
+
+#
+# Thread prefix customization:
+
+#
+# Customize the thread prefix appearance by selecting the arrow head.
+#
+# Default: ">"
+#thread-prefix-tip = ">"
+
+#
+# Customize the thread prefix appearance by selecting the arrow indentation.
+#
+# Default: " "
+#thread-prefix-indent = " "
+
+#
+# Customize the thread prefix appearance by selecting the vertical extension of
+# the arrow.
+#
+# Default: "│"
+#thread-prefix-stem = "│"
+
+#
+# Customize the thread prefix appearance by selecting the horizontal extension
+# of the arrow.
+#
+# Default: ""
+#thread-prefix-limb = ""
+
+#
+# Customize the thread prefix appearance by selecting the folded thread
+# indicator.
+#
+# Default: "+"
+#thread-prefix-folded = "+"
+
+#
+# Customize the thread prefix appearance by selecting the unfolded thread
+# indicator.
+#
+# Default: ""
+#thread-prefix-unfolded = ""
+
+#
+# Customize the thread prefix appearance by selecting the first child connector.
+#
+# Default: ""
+#thread-prefix-first-child = ""
+
+#
+# Customize the thread prefix appearance by selecting the connector used if
+# the message has siblings.
+#
+# Default: "├─"
+#thread-prefix-has-siblings = "├─"
+
+#
+# Customize the thread prefix appearance by selecting the connector used if the
+# message has no parents and no children.
+#
+# Default: ""
+#thread-prefix-lone = ""
+
+#
+# Customize the thread prefix appearance by selecting the connector used if the
+# message has no parents and has children.
+#
+# Default: ""
+#thread-prefix-orphan = ""
+
+#
+# Customize the thread prefix appearance by selecting the connector for the last
+# sibling.
+#
+# Default: "└─"
+#thread-prefix-last-sibling = "└─"
+
+#
+# Customize the reversed thread prefix appearance by selecting the connector for
+# the last sibling.
+#
+# Default: "┌─"
+#thread-prefix-last-sibling-reverse = "┌─"
+
+#
+# Customize the thread prefix appearance by selecting the connector for dummy
+# thread.
+#
+# Default: "┬─"
+#thread-prefix-dummy = "┬─"
+
+#
+# Customize the reversed thread prefix appearance by selecting the connector for
+# dummy thread.
+#
+# Default: "┴─"
+#thread-prefix-dummy-reverse = "┴─"
+
+#
+# Customize the reversed thread prefix appearance by selecting the first child
+# connector.
+#
+# Default: ""
+#thread-prefix-first-child-reverse = ""
+
+#
+# Customize the reversed thread prefix appearance by selecting the connector
+# used if the message has no parents and has children.
+#
+# Default: ""
+#thread-prefix-orphan-reverse = ""
+
+[statusline]
+#
+# Describes the format for the status line. This is a comma separated list of
+# column names with an optional align and width suffix. See [ui].index-columns
+# for more details. To completely mute the status line except for push
+# notifications, explicitly set status-columns to an empty string.
+#
+# Default: left<*,center:=,right>*
+#status-columns=left<*,center:=,right>*
+
+#
+# Each name in status-columns must have a corresponding column-$name setting.
+# All column-$name settings accept golang text/template syntax. See
+# aerc-templates(7) for available template attributes and functions.
+#
+# Default settings
+#column-left=[{{.Account}}] {{.StatusInfo}}
+#column-center={{.PendingKeys}}
+#column-right={{.TrayInfo}} | {{cwd}}
+
+#
+# String separator inserted between columns.
+# See [ui].column-separator for more details.
+#
+#column-separator=" "
+
+# Specifies the separator between grouped statusline elements.
+#
+# Default: " | "
+#separator=" | "
+
+# Defines the mode for displaying the status elements.
+# Options: text, icon
+#
+# Default: text
+#display-mode=text
+
+[viewer]
+#
+# Specifies the pager to use when displaying emails. Note that some filters
+# may add ANSI codes to add color to rendered emails, so you may want to use a
+# pager which supports ANSI codes.
+#
+# Default: less -Rc
+pager=less -Rc
+
+#
+# If an email offers several versions (multipart), you can configure which
+# mimetype to prefer. For example, this can be used to prefer plaintext over
+# html emails.
+#
+# Default: text/plain,text/html
+alternatives=text/html,text/plain
+
+#
+# Default setting to determine whether to show full headers or only parsed
+# ones in message viewer.
+#
+# Default: false
+#show-headers=false
+
+#
+# Layout of headers when viewing a message. To display multiple headers in the
+# same row, separate them with a pipe, e.g. "From|To". Rows will be hidden if
+# none of their specified headers are present in the message.
+#
+# Default: From|To,Cc|Bcc,Date,Subject
+#header-layout=From|To,Cc|Bcc,Date,Subject
+
+# Whether to always show the mimetype of an email, even when it is just a single part
+#
+# Default: false
+#always-show-mime=false
+
+# Define the maximum height of the mimetype switcher before a scrollbar is used.
+# The height of the mimetype switcher is restricted to half of the display
+# height. If the provided value for the height is zero, the number of parts will
+# be used as the height of the type switcher.
+#
+# Default: 0
+#max-mime-height = 0
+
+# Parses and extracts http links when viewing a message. Links can then be
+# accessed with the open-link command.
+#
+# Default: true
+#parse-http-links=true
+
+[compose]
+#
+# Specifies the command to run the editor with. It will be shown in an embedded
+# terminal, though it may also launch a graphical window if the environment
+# supports it. Defaults to $EDITOR, or vi.
+#editor=
+
+#
+# When set, aerc will create and read .eml files for composing that have
+# non-standard \n linebreaks. This is only relevant if the used editor does not
+# support CRLF linebreaks.
+#
+#lf-editor=false
+
+#
+# Default header fields to display when composing a message. To display
+# multiple headers in the same row, separate them with a pipe, e.g. "To|From".
+#
+# Default: To|From,Subject
+#header-layout=To|From,Subject
+
+#
+# Edit headers into the text editor instead than separate fields.
+#
+# When this is true, address-book-cmd is not supported and address completion
+# is left to the editor itself. Also, displaying multiple headers on the same
+# line is not possible.
+#
+# Default: false
+#edit-headers=false
+
+#
+# Specifies the command to be used to tab-complete email addresses. Any
+# occurrence of "%s" in the address-book-cmd will be replaced with what the
+# user has typed so far.
+#
+# The command must output the completions to standard output, one completion
+# per line. Each line must be tab-delimited, with an email address occurring as
+# the first field. Only the email address field is required. The second field,
+# if present, will be treated as the contact name. Additional fields are
+# ignored.
+#
+# This parameter can also be set per account in accounts.conf.
+#address-book-cmd=
+
+# Specifies the command to be used to select attachments. Any occurrence of
+# '%s' in the file-picker-cmd will be replaced with the argument <arg>
+# to :attach -m <arg>. Any occurence of '%f' will be replaced by the
+# location of a temporary file, from which aerc will read the selected files.
+#
+# If '%f' is not present, the command must output the selected files to
+# standard output, one file per line. If it is present, then aerc does not
+# capture the standard output and instead reads the files from the temporary
+# file which should have the same format.
+#file-picker-cmd=
+
+#
+# Allow to address yourself when replying
+#
+# Default: true
+#reply-to-self=true
+
+# Warn before sending an email with an empty subject.
+#
+# Default: false
+#empty-subject-warning=false
+
+#
+# Warn before sending an email that matches the specified regexp but does not
+# have any attachments. Leave empty to disable this feature.
+#
+# Uses Go's regexp syntax, documented at https://golang.org/s/re2syntax. The
+# "(?im)" flags are set by default (case-insensitive and multi-line).
+#
+# Example:
+# no-attachment-warning=^[^>]*attach(ed|ment)
+#
+#no-attachment-warning=
+
+#
+# When set, aerc will generate "format=flowed" bodies with a content type of
+# "text/plain; format=flowed" as described in RFC3676. This format is easier to
+# handle for some mailing software, and generally just looks like ordinary
+# text. To actually make use of this format's features, you'll need support in
+# your editor.
+#
+#format-flowed=false
+
+[multipart-converters]
+#
+# Converters allow to generate multipart/alternative messages by converting the
+# main text/plain part into any other MIME type. Only exact MIME types are
+# accepted. The commands are invoked with sh -c and are expected to output
+# valid UTF-8 text.
+#
+# Example (obviously, this requires that you write your main text/plain body
+# using the markdown syntax):
+#text/html=pandoc -f markdown -t html --standalone
+
+[filters]
+#
+# Filters allow you to pipe an email body through a shell command to render
+# certain emails differently, e.g. highlighting them with ANSI escape codes.
+#
+# The commands are invoked with sh -c. The following folders are prepended to
+# the system $PATH to allow referencing filters from their name only:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/filters
+#   ~/.local/libexec/aerc/filters
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/filters
+#   $PREFIX/libexec/aerc/filters
+#   $PREFIX/share/aerc/filters
+#   /usr/libexec/aerc/filters
+#   /usr/share/aerc/filters
+#
+# If you want to run a program in your default $PATH which has the same name
+# as a builtin filter (e.g. /usr/bin/colorize), use its absolute path.
+#
+# The following variables are defined in the filter command environment:
+#
+#   AERC_MIME_TYPE      the part MIME type/subtype
+#   AERC_FORMAT         the part content type format= parameter
+#   AERC_FILENAME       the attachment filename (if any)
+#   AERC_SUBJECT        the message Subject header value
+#   AERC_FROM           the message From header value
+#
+# The first filter which matches the email's mimetype will be used, so order
+# them from most to least specific.
+#
+# You can also match on non-mimetypes, by prefixing with the header to match
+# against (non-case-sensitive) and a comma, e.g. subject,text will match a
+# subject which contains "text". Use header,~regex to match against a regex.
+#
+text/plain=colorize
+text/calendar=calendar
+message/delivery-status=colorize
+message/rfc822=colorize
+text/html=cha -T text/html -d -o display.color-mode="true-color" -o buffer.mark-links=true
+# text/html=! html-unsafe -sixel
+#text/html=pandoc -f html -t plain | colorize
+#text/html=html | colorize
+#text/*=bat -fP --file-name="$AERC_FILENAME"
+#application/x-sh=bat -fP -l sh
+#image/*=catimg -w $(tput cols) -
+#subject,~Git(hub|lab)=lolcat -f
+#from,thatguywhodoesnothardwraphismessages=wrap -w 100 | colorize
+
+# This special filter is only used to post-process email headers when
+# [viewer].show-headers=true
+# By default, headers are piped directly into the pager.
+#
+.headers=colorize
+
+[openers]
+#
+# Openers allow you to specify the command to use for the :open and :open-link
+# actions on a per-MIME-type basis. The :open-link URL scheme is used to
+# determine the MIME type as follows: x-scheme-handler/<scheme>.
+#
+# {} is expanded as the temporary filename or URL to be opened with proper
+# shell quoting. If it is not encountered in the command, the filename/URL will
+# be appended to the end of the command. The command will then be executed with
+# `sh -c`.
+#
+# Like [filters], openers support basic shell globbing. The first opener which
+# matches the part's MIME type (or URL scheme handler MIME type) will be used,
+# so order them from most to least specific.
+#
+# Examples:
+# x-scheme-handler/irc=hexchat
+# x-scheme-handler/http*=printf '%s' {} | wl-copy
+# text/html=surf -dfgms
+text/html=cha
+# text/plain=gvim {} +125
+# message/rfc822=thunderbird
+
+[hooks]
+#
+# Hooks are triggered whenever the associated event occurs.
+
+#
+# Executed when a new email arrives in the selected folder
+#mail-received=notify-send "[$AERC_ACCOUNT/$AERC_FOLDER] New mail from $AERC_FROM_NAME" "$AERC_SUBJECT"
+
+#
+# Executed when mail is deleted from a folder
+#mail-deleted=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &
+
+#
+# Executed when aerc adds mail to a folder
+#mail-added=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &
+
+#
+# Executed when aerc starts
+#aerc-startup=aerc :terminal calcurse && aerc :next-tab
+
+#
+# Executed when aerc shuts down.
+#aerc-shutdown=
+
+#
+# Executed when notmuch tags are modified.
+#tag-modified=
+
+#
+# Executed when flags are changed on a message.
+#flag-changed=mbsync "$AERC_ACCOUNT:$AERC_FOLDER" &
+
+[templates]
+# Templates are used to populate email bodies automatically.
+#
+
+# The directories where the templates are stored. It takes a colon-separated
+# list of directories. If this is unset or if a template cannot be found, the
+# following paths will be used as a fallback in that order:
+#
+#   ${XDG_CONFIG_HOME:-~/.config}/aerc/templates
+#   ${XDG_DATA_HOME:-~/.local/share}/aerc/templates
+#   /usr/local/share/aerc/templates
+#   /usr/share/aerc/templates
+#
+#template-dirs=
+
+# The default template to be used for new messages.
+#
+# default: new_message
+#new-message=new_message
+
+# The default template to be used for quoted replies.
+#
+# default: quoted_reply
+#quoted-reply=quoted_reply
+
+# The default template to be used for forward as body.
+#
+# default: forward_as_body
+#forwards=forward_as_body

config/.config/aerc/binds.conf

@@ -0,0 +1,184 @@
+# Binds are of the form <key sequence> = <command to run>
+# To use '=' in a key sequence, substitute it with "Eq": "<Ctrl+Eq>"
+# If you wish to bind #, you can wrap the key sequence in quotes: "#" = quit
+<C-p> = :prev-tab<Enter>
+<C-PgUp> = :prev-tab<Enter>
+<C-n> = :next-tab<Enter>
+<C-PgDn> = :next-tab<Enter>
+\[t = :prev-tab<Enter>
+\]t = :next-tab<Enter>
+<C-t> = :term<Enter>
+? = :help keys<Enter>
+<C-c> = :prompt 'Quit?' quit<Enter>
+<C-q> = :prompt 'Quit?' quit<Enter>
+<C-z> = :suspend<Enter>
+
+[messages]
+q = :prompt 'Quit?' quit<Enter>
+
+j = :next<Enter>
+<Down> = :next<Enter>
+<C-d> = :next 50%<Enter>
+<C-f> = :next 100%<Enter>
+<PgDn> = :next 100%<Enter>
+
+k = :prev<Enter>
+<Up> = :prev<Enter>
+<C-u> = :prev 50%<Enter>
+<C-b> = :prev 100%<Enter>
+<PgUp> = :prev 100%<Enter>
+g = :select 0<Enter>
+G = :select -1<Enter>
+
+J = :next-folder<Enter>
+<C-Down> = :next-folder<Enter>
+K = :prev-folder<Enter>
+<C-Up> = :prev-folder<Enter>
+H = :collapse-folder<Enter>
+<C-Left> = :collapse-folder<Enter>
+L = :expand-folder<Enter>
+<C-Right> = :expand-folder<Enter>
+
+v = :mark -t<Enter>
+<Space> = :mark -t<Enter>:next<Enter>
+V = :mark -v<Enter>
+
+T = :toggle-threads<Enter>
+zc = :fold<Enter>
+zo = :unfold<Enter>
+za = :fold -t<Enter>
+zM = :fold -a<Enter>
+zR = :unfold -a<Enter>
+<tab> = :fold -t<Enter>
+
+zz = :align center<Enter>
+zt = :align top<Enter>
+zb = :align bottom<Enter>
+
+<Enter> = :view<Enter>
+d = :choose -o y 'Really delete this message' delete-message<Enter>
+D = :delete<Enter>
+a = :archive flat<Enter>
+A = :unmark -a<Enter>:mark -T<Enter>:archive flat<Enter>
+
+C = :compose<Enter>
+m = :compose<Enter>
+
+b = :bounce<space>
+
+rr = :reply -a<Enter>
+rq = :reply -aq<Enter>
+Rr = :reply<Enter>
+Rq = :reply -q<Enter>
+
+c = :cf<space>
+$ = :term<space>
+! = :term<space>
+| = :pipe<space>
+
+/ = :search<space>
+\ = :filter<space>
+n = :next-result<Enter>
+N = :prev-result<Enter>
+<Esc> = :clear<Enter>
+
+s = :split<Enter>
+S = :vsplit<Enter>
+
+pl = :patch list<Enter>
+pa = :patch apply <Tab>
+pd = :patch drop <Tab>
+pb = :patch rebase<Enter>
+pt = :patch term<Enter>
+ps = :patch switch <Tab>
+
+[messages:folder=Drafts]
+<Enter> = :recall<Enter>
+
+[view]
+/ = :toggle-key-passthrough<Enter>/
+q = :close<Enter>
+O = :open<Enter>
+o = :open<Enter>
+S = :save<space>
+| = :pipe<space>
+D = :delete<Enter>
+A = :archive flat<Enter>
+
+<C-l> = :open-link <space>
+
+f = :forward<Enter>
+rr = :reply -a<Enter>
+rq = :reply -aq<Enter>
+Rr = :reply<Enter>
+Rq = :reply -q<Enter>
+
+H = :toggle-headers<Enter>
+<C-k> = :prev-part<Enter>
+<C-Up> = :prev-part<Enter>
+<C-j> = :next-part<Enter>
+<C-Down> = :next-part<Enter>
+J = :next<Enter>
+<C-Right> = :next<Enter>
+K = :prev<Enter>
+<C-Left> = :prev<Enter>
+
+[view::passthrough]
+$noinherit = true
+$ex = <C-x>
+<Esc> = :toggle-key-passthrough<Enter>
+
+[compose]
+# Keybindings used when the embedded terminal is not selected in the compose
+# view
+$noinherit = true
+$ex = <C-x>
+$complete = <C-o>
+<C-k> = :prev-field<Enter>
+<C-Up> = :prev-field<Enter>
+<C-j> = :next-field<Enter>
+<C-Down> = :next-field<Enter>
+<A-p> = :switch-account -p<Enter>
+<C-Left> = :switch-account -p<Enter>
+<A-n> = :switch-account -n<Enter>
+<C-Right> = :switch-account -n<Enter>
+<tab> = :next-field<Enter>
+<backtab> = :prev-field<Enter>
+<C-p> = :prev-tab<Enter>
+<C-PgUp> = :prev-tab<Enter>
+<C-n> = :next-tab<Enter>
+<C-PgDn> = :next-tab<Enter>
+
+[compose::editor]
+# Keybindings used when the embedded terminal is selected in the compose view
+$noinherit = true
+$ex = <C-x>
+<C-k> = :prev-field<Enter>
+<C-Up> = :prev-field<Enter>
+<C-j> = :next-field<Enter>
+<C-Down> = :next-field<Enter>
+<C-p> = :prev-tab<Enter>
+<C-PgUp> = :prev-tab<Enter>
+<C-n> = :next-tab<Enter>
+<C-PgDn> = :next-tab<Enter>
+
+[compose::review]
+# Keybindings used when reviewing a message to be sent
+# Inline comments are used as descriptions on the review screen
+y = :send<Enter> # Send
+n = :abort<Enter> # Abort (discard message, no confirmation)
+v = :preview<Enter> # Preview message
+p = :postpone<Enter> # Postpone
+q = :choose -o d discard abort -o p postpone postpone<Enter> # Abort or postpone
+e = :edit<Enter> # Edit
+a = :attach<space> # Add attachment
+d = :detach<space> # Remove attachment
+
+[terminal]
+$noinherit = true
+$ex = <C-x>
+
+<C-p> = :prev-tab<Enter>
+<C-n> = :next-tab<Enter>
+<C-PgUp> = :prev-tab<Enter>
+<C-PgDn> = :next-tab<Enter>

config/.config/chawan/config.toml

@@ -0,0 +1,3 @@
+[buffer]
+images = true
+scripting = true

config/.config/doom/config.el

@@ -125,3 +125,48 @@
 ;; (add-to-list treesit-language-source-alist '(odin "https://github.com/tree-sitter-grammars/tree-sitter-odin"))
 
 (setq lsp-inlay-hint-enable 't)
+
+(after! mu4e
+  (setq sendmail-program (executable-find "msmtp")
+        send-mail-function #'smtpmail-send-it
+        message-sendmail-f-is-evil t
+        message-sendmail-extra-arguments '("--read-envelope-from")
+        message-send-mail-function #'message-send-mail-with-sendmail))
+(set-email-account! "hosted";"mikec@mchalupiak.com"
+                    '((mu4e-sent-folder       . "/mikec@mchalupiak.com/Sent")
+                      (mu4e-drafts-folder     . "/mikec@mchalupiak.com/Drafts")
+                      (mu4e-trash-folder      . "/mikec@mchalupiak.com/Junk")
+                      (mu4e-refile-folder     . "/mikec@mchalupiak.com/INBOX"))
+                    ;;(smtpmail-smtp-user     . "foo@bar.com")
+                    ;;(user-mail-address      . "foo@bar.com")    ;; only needed for mu < 1.4
+                    ;;(mu4e-compose-signature . "---\nYours truly\nThe Baz"))
+                    t)
+(set-email-account! "spamreciver1@outlook.com"
+                    '((mu4e-sent-folder       . "/spamreciver1@outlook.com/Sent")
+                      (mu4e-drafts-folder     . "/spamreciver1@outlook.com/Drafts")
+                      (mu4e-trash-folder      . "/spamreciver1@outlook.com/Junk")
+                      (mu4e-refile-folder     . "/spamreciver1@outlook.com/INBOX"))
+                    ;;(smtpmail-smtp-user     . "foo@bar.com")
+                    ;;(user-mail-address      . "foo@bar.com")    ;; only needed for mu < 1.4
+                    ;;(mu4e-compose-signature . "---\nYours truly\nThe Baz"))
+                    t)
+(set-email-account! "mikecchalupiak@outlook.com"
+                    '((mu4e-sent-folder       . "/mikecchalupiak@outlook.com/Sent")
+                      (mu4e-drafts-folder     . "/mikecchalupiak@outlook.com/Drafts")
+                      (mu4e-trash-folder      . "/mikecchalupiak@outlook.com/Junk")
+                      (mu4e-refile-folder     . "/mikecchalupiak@outlook.com/INBOX"))
+                    ;;(smtpmail-smtp-user     . "foo@bar.com")
+                    ;;(user-mail-address      . "foo@bar.com")    ;; only needed for mu < 1.4
+                    ;;(mu4e-compose-signature . "---\nYours truly\nThe Baz"))
+                    t)
+
+(set-email-account! "chalupmc@rose-hulman.edu"
+                    '((mu4e-sent-folder       . "/chalupmc@rose-hulman.edu/Sent")
+                      (mu4e-drafts-folder     . "/chalupmc@rose-hulman.edu/Drafts")
+                      (mu4e-trash-folder      . "/chalupmc@rose-hulman.edu/Junk")
+                      (mu4e-refile-folder     . "/chalupmc@rose-hulman.edu/INBOX"))
+                    ;;(smtpmail-smtp-user     . "foo@bar.com")
+                    ;;(user-mail-address      . "foo@bar.com")    ;; only needed for mu < 1.4
+                    ;;(mu4e-compose-signature . "---\nYours truly\nThe Baz"))
+                    t)
+;;(setq +notmuch-sync-backend 'mbsync)

config/.config/doom/init.el

@@ -38,7 +38,7 @@
        indent-guides     ; highlighted indent columns
        ;;ligatures         ; ligatures and symbols to make your code pretty again
        ;;minimap           ; show a map of the code on the side
-       ;; modeline          ; snazzy, Atom-inspired modeline, plus API
+       modeline          ; snazzy, Atom-inspired modeline, plus API
        ;;nav-flash         ; blink cursor line after big motions
        ;;neotree           ; a project drawer, like NERDTree for vim
        ophints           ; highlight the region an operation acts on
@@ -182,7 +182,7 @@
        (zig +lsp +tree-sitter)               ; C, but simpler
 
        :email
-       ;;(mu4e +org +gmail)
+       (mu4e +org +gmail +mbsync)
        ;;notmuch
        ;;(wanderlust +gmail)
 

config/.config/ghostty/config

@@ -21,3 +21,18 @@ theme = light:Dawnfox,dark:Carbonfox
 # gtk-adwaita = true
 window-decoration = true
 shell-integration-features = true
+mouse-scroll-multiplier = 1
+
+# tmux style binds
+keybind = ctrl+a>c=new_tab
+keybind = ctrl+a>x=close_surface
+keybind = ctrl+a>n=next_tab
+keybind = ctrl+a>p=previous_tab
+keybind = ctrl+a>comma=prompt_tab_title
+keybind = ctrl+a>shift+5=new_split:right
+keybind = ctrl+a>shift+quote=new_split:down
+keybind = ctrl+a>o=goto_split:next
+keybind = ctrl+a>l=goto_split:right
+keybind = ctrl+a>h=goto_split:left
+keybind = ctrl+a>j=goto_split:down
+keybind = ctrl+a>k=goto_split:up

config/.config/kak-tree-sitter/config.toml

@@ -85,26 +85,26 @@ pin = "46cf4ded12ee974a70bf8457263b67ad7ee0379d"
 [language.typst.queries]
 path = "queries/typst"
 
-# swift
+# # swift
-[swift.grammar.source.git]
+# [swift.grammar.source.git]
-url = "https://github.com/alex-pinkus/tree-sitter-swift"
-pin = "57c1c6d6ffa1c44b330182d41717e6fe37430704"
-
-[swift.grammar]
-path = "src"
-compile = "cc"
-compile_args = ["-c", "-fpic", "../scanner.c", "-I", ".."]
-compile_flags = ["-O3"]
-link = "cc"
-link_args = ["-shared", "-fpic", "scanner.o", "-o", "swift.so"]
-link_flags = ["-O3"]
-
-[language.swift.queries.source.git]
-url = "https://github.com/helix-editor/helix"
-pin = "6bedca80646ce7350fb73029adf802ce7d9e241d"
-
 # url = "https://github.com/alex-pinkus/tree-sitter-swift"
 # pin = "57c1c6d6ffa1c44b330182d41717e6fe37430704"
-
+#
-[language.swift.queries]
+# [swift.grammar]
-path = "runtime/queries/swift"
+# path = "src"
+# compile = "cc"
+# compile_args = ["-c", "-fpic", "../scanner.c", "-I", ".."]
+# compile_flags = ["-O3"]
+# link = "cc"
+# link_args = ["-shared", "-fpic", "scanner.o", "-o", "swift.so"]
+# link_flags = ["-O3"]
+#
+# [language.swift.queries.source.git]
+# url = "https://github.com/helix-editor/helix"
+# pin = "6bedca80646ce7350fb73029adf802ce7d9e241d"
+#
+# # url = "https://github.com/alex-pinkus/tree-sitter-swift"
+# # pin = "57c1c6d6ffa1c44b330182d41717e6fe37430704"
+#
+# [language.swift.queries]
+# path = "runtime/queries/swift"

config/.config/kak/kakrc

@@ -231,7 +231,7 @@ set-option global lsp_hover_anchor true
 lsp-auto-signature-help-enable
 lsp-inlay-hints-enable global
 
-map global user k ':lsp-hover'
+map global user k ':lsp-hover<ret>'
 
 hook global WinSetOption filetype=(c|cpp|zig|rust|python|ruby|lua|java|html|css) %{
       hook window -group semantic-tokens BufReload .* lsp-semantic-tokens
@@ -281,7 +281,7 @@ set-option global lsp_config %{
 
 define-command fzf-buffer -docstring 'Invoke fzf to select a buffer' %{
     evaluate-commands %sh{
-        tmux split-window -l 30% "(printf \"%s\n\" $kak_quoted_buflist | fzf --bind 'focus:execute-silent(echo \"eval -client $kak_client %{ e {} }\" | kak -p $kak_session)' || echo \"$kak_buffile\") | xargs -I{} echo \"eval -client $kak_client %{ e '{}' }\" | /usr/bin/kak -p $kak_session"
+        tmux split-window -l 20% "(printf \"%s\n\" $kak_quoted_buflist | fzf --bind 'focus:execute-silent(echo \"eval -client $kak_client %{ e {} }\" | kak -p $kak_session)' || echo \"$kak_buffile\") | xargs -I{} echo \"eval -client $kak_client %{ e '{}' }\" | /usr/bin/kak -p $kak_session"
     }
 }
 

config/.config/newsboat/config

@@ -18,6 +18,8 @@ bind-key G end
 podlist-format "%2i %b %> %S [%dMB / %tMB] [%p %%] [%K]"
 download-filename-format "%t | %n [%F].%e"
 download-path "~/podcasts/%n/"
+browser "cha %u"
+html-renderer "cha -T text/html -d -o display.color-mode=\"true-color\" -o buffer.mark-links=true"
 
 macro 1 set browser "curl %u --output /tmp/image && sxiv /tmp/image && rm /tmp/image"; one; set browser lynx
 macro 2 set browser "mpv --vid=no -- %u"; one; set browser lynx

config/.config/newsboat/urls

@@ -1,4 +1,5 @@
 https://phaazon.net/blog/feed
+https://port19.xyz/rss.xml
 https://danielde.dev/rss.xml
 https://sizeof.cat/index.xml
 https://pkolaczk.github.io/feed.xml

config/.config/nvim/lazy-lock.json

@@ -1,69 +1,74 @@
 {
   "auto-dark-mode.nvim": { "branch": "master", "commit": "e300259ec777a40b4b9e3c8e6ade203e78d15881" },
-  "blink.cmp": { "branch": "main", "commit": "327fff91fe6af358e990be7be1ec8b78037d2138" },
+  "blink.cmp": { "branch": "main", "commit": "451168851e8e2466bc97ee3e026c3dcb9141ce07" },
-  "catppuccin": { "branch": "main", "commit": "8c4125e3c746976ba025dc5d908fa22c6aa09486" },
+  "catppuccin": { "branch": "main", "commit": "a7788416689dbefea659d9e9415c87926b0ba5d8" },
   "cellular-automaton.nvim": { "branch": "main", "commit": "1606e9d5d04ff254023c3f3c62842d065708d6d3" },
-  "compiler-explorer.nvim": { "branch": "master", "commit": "ee8e7a2808bdad67cd2acb61b5c9ffa7735c7ec9" },
+  "command.nvim": { "branch": "main", "commit": "cf73df4f9afc123b1fc3a8674d3fae08d2ad67db" },
+  "compiler-explorer.nvim": { "branch": "master", "commit": "523c6a7a3d8c034b421a71eb20b0da75b0b16f62" },
   "diffview.nvim": { "branch": "main", "commit": "4516612fe98ff56ae0415a259ff6361a89419b0a" },
   "dim.lua": { "branch": "main", "commit": "a3a0dce75f7212ab61130e77a8157530bd23db15" },
-  "dracula.nvim": { "branch": "main", "commit": "041d923368d540a1e438989ce8f915628081a56a" },
+  "dracula.nvim": { "branch": "main", "commit": "ae752c13e95fb7c5f58da4b5123cb804ea7568ee" },
   "dropbar.nvim": { "branch": "master", "commit": "ce202248134e3949aac375fd66c28e5207785b10" },
   "everblush": { "branch": "main", "commit": "678f808d81801b983b6fb8296fb17ba1b2785d7c" },
-  "everforest": { "branch": "master", "commit": "0909c23a2b8cbc337cffe91fda36381747e88506" },
+  "everforest": { "branch": "master", "commit": "b03a03148c8b34c24c96960b93da9c8883d11f54" },
   "fennel.vim": { "branch": "main", "commit": "c6a9c035ca108cbb24273d96cd6277fb8fbc60b4" },
+  "firenvim": { "branch": "master", "commit": "a18ef908ac06b52ad9333b70e3e630b0a56ecb3d" },
   "github-colors": { "branch": "main", "commit": "7292749e49e6f870e63879a528bb05c8c8d1a59a" },
   "github-nvim-theme": { "branch": "main", "commit": "c106c9472154d6b2c74b74565616b877ae8ed31d" },
-  "gitsigns.nvim": { "branch": "main", "commit": "20ad4419564d6e22b189f6738116b38871082332" },
+  "gitsigns.nvim": { "branch": "main", "commit": "caa98e2e5e4c23a1652c23be839d2e1722cecc29" },
-  "gruvbox-material": { "branch": "master", "commit": "834dbf21836862300ced7444db4262b796330ab7" },
+  "gruvbox-material": { "branch": "master", "commit": "790afe9dd085aa04eccd1da3626c5fa05c620e53" },
-  "gruvbox.nvim": { "branch": "main", "commit": "5e0a460d8e0f7f669c158dedd5f9ae2bcac31437" },
+  "gruvbox.nvim": { "branch": "main", "commit": "334d5fd49fc8033f26408425366c66c6390c57bb" },
   "hex.nvim": { "branch": "master", "commit": "b46e63356a69e8d6f046c38a9708d55d17f15038" },
-  "lazy.nvim": { "branch": "main", "commit": "f0f5bbb9e5bfae5e6468f9359ffea3d151418176" },
+  "lazy.nvim": { "branch": "main", "commit": "306a05526ada86a7b30af95c5cc81ffba93fef97" },
-  "leap.nvim": { "branch": "main", "commit": "44e3a60a7a62069e5c9445b7a8104612d4f060cb" },
+  "leap.nvim": { "branch": "main", "commit": "b960d5038c5c505c52e56a54490f9bbb1f0e6ef6" },
   "love2d.nvim": { "branch": "main", "commit": "25715394680590f56aab90390d430cab0dc46808" },
   "lua-utils.nvim": { "branch": "main", "commit": "e565749421f4bbb5d2e85e37c3cef9d56553d8bd" },
-  "lualine.nvim": { "branch": "master", "commit": "3946f0122255bc377d14a59b27b609fb3ab25768" },
+  "lualine.nvim": { "branch": "master", "commit": "47f91c416daef12db467145e16bed5bbfe00add8" },
-  "mason-lspconfig.nvim": { "branch": "main", "commit": "35ec9e1425c2f9a36f556893336af4f302c63214" },
+  "mason-lspconfig.nvim": { "branch": "main", "commit": "25f609e7fca78af7cede4f9fa3af8a94b1c4950b" },
-  "mason.nvim": { "branch": "main", "commit": "ad7146aa61dcaeb54fa900144d768f040090bff0" },
+  "mason.nvim": { "branch": "main", "commit": "44d1e90e1f66e077268191e3ee9d2ac97cc18e65" },
   "melange-nvim": { "branch": "master", "commit": "ce42f6b629beeaa00591ba73a77d3eeac4cf28ce" },
-  "mellow.nvim": { "branch": "main", "commit": "5cd188489bcc7eb512f0a30581ad972070f8e5cd" },
+  "mellow.nvim": { "branch": "main", "commit": "6273b7f0ddf6ac2b75021b3bc0bd8b3305cfeef1" },
-  "mini.nvim": { "branch": "main", "commit": "ee4a4a4abed25e3d108d985b0553c5271f2f71aa" },
+  "mini.nvim": { "branch": "main", "commit": "3923662bf3d6ca49a9503f8d7196ea0450983e6a" },
   "monochrome.nvim": { "branch": "main", "commit": "2de78d9688ea4a177bcd9be554ab9192337d35ff" },
   "monokai.nvim": { "branch": "master", "commit": "b8bd44d5796503173627d7a1fc51f77ec3a08a63" },
   "moonlight.nvim": { "branch": "pure-lua", "commit": "e24e4218ec680b6396532808abf57ca0ada82e66" },
   "moonscript-vim": { "branch": "master", "commit": "715c96c7c3b02adc507f84bf5754985460afc426" },
+  "multicursor.nvim": { "branch": "1.0", "commit": "704b99f10a72cc05d370cfeb294ff83412a8ab55" },
   "nabla.nvim": { "branch": "master", "commit": "9b69b709063ccf40ac36fabb4fff7d90b3736475" },
-  "nelua.vim": { "branch": "main", "commit": "5bc2ce7cc1ae952940bb3419ad106c02820f4baf" },
+  "nelua.vim": { "branch": "main", "commit": "08ddb2e0dda7d2bd6cd9d4efadb6a07547e135c3" },
-  "neogit": { "branch": "master", "commit": "c6d00913f802acedfb93c01267e89185f25800ca" },
+  "neogit": { "branch": "master", "commit": "4681c1fdac1b730592ae195576e87406f7255750" },
-  "neorg": { "branch": "main", "commit": "e206c9642f4a115cd836e76c98ef785623d335bc" },
+  "neorg": { "branch": "main", "commit": "408fc04013a95da8f217cb0958a06b6a77c01743" },
   "nightfox.nvim": { "branch": "main", "commit": "ba47d4b4c5ec308718641ba7402c143836f35aa9" },
   "nord.nvim": { "branch": "master", "commit": "80c1e5321505aeb22b7a9f23eb82f1e193c12470" },
   "nui.nvim": { "branch": "main", "commit": "de740991c12411b663994b2860f1a4fd0937c130" },
-  "nvim-autopairs": { "branch": "master", "commit": "7a2c97cccd60abc559344042fefb1d5a85b3e33b" },
+  "nvim-autopairs": { "branch": "master", "commit": "59bce2eef357189c3305e25bc6dd2d138c1683f5" },
-  "nvim-highlight-colors": { "branch": "main", "commit": "e0c4a58ec8c3ca7c92d3ee4eb3bc1dd0f7be317e" },
+  "nvim-highlight-colors": { "branch": "main", "commit": "e2cb22089cc2358b2b995c09578224f142de6039" },
-  "nvim-lspconfig": { "branch": "master", "commit": "cbd1e91296189a765094810de1b71a04e2597579" },
+  "nvim-lspconfig": { "branch": "master", "commit": "5492a24edd68f78d8a778edcb8905d0a28993abc" },
   "nvim-nio": { "branch": "master", "commit": "21f5324bfac14e22ba26553caf69ec76ae8a7662" },
-  "nvim-surround": { "branch": "main", "commit": "fcfa7e02323d57bfacc3a141f8a74498e1522064" },
+  "nvim-surround": { "branch": "main", "commit": "1098d7b3c34adcfa7feb3289ee434529abd4afd1" },
-  "nvim-treesitter": { "branch": "master", "commit": "42fc28ba918343ebfd5565147a42a26580579482" },
+  "nvim-treesitter": { "branch": "master", "commit": "cf12346a3414fa1b06af75c79faebe7f76df080a" },
-  "nvim-treesitter-textobjects": { "branch": "master", "commit": "a9742cbc1f95db9eaf3293bf8cd0622ca36542bb" },
+  "nvim-treesitter-textobjects": { "branch": "master", "commit": "5ca4aaa6efdcc59be46b95a3e876300cfead05ef" },
-  "nvim-ts-autotag": { "branch": "main", "commit": "c4ca798ab95b316a768d51eaaaee48f64a4a46bc" },
+  "nvim-ts-autotag": { "branch": "main", "commit": "8e1c0a389f20bf7f5b0dd0e00306c1247bda2595" },
   "nvim-unception": { "branch": "main", "commit": "df0e505f0f1371c49c2bcf993985962edb5a279d" },
-  "nvim-web-devicons": { "branch": "master", "commit": "8dcb311b0c92d460fac00eac706abd43d94d68af" },
+  "nvim-web-devicons": { "branch": "master", "commit": "d7462543c9e366c0d196c7f67a945eaaf5d99414" },
   "oceanic-next": { "branch": "master", "commit": "09833f72d5ba23de2e8bcae18f479f326f5f677a" },
-  "oil.nvim": { "branch": "master", "commit": "7e1cd7703ff2924d7038476dcbc04b950203b902" },
+  "oil.nvim": { "branch": "master", "commit": "0fcc83805ad11cf714a949c98c605ed717e0b83e" },
   "one-nvim": { "branch": "main", "commit": "faf6fb3f98fccbe009c3466f657a8fff84a5f956" },
-  "onedark.nvim": { "branch": "master", "commit": "6c10964f91321c6a0f09bcc41dd64e7a6602bc4f" },
+  "onedark.nvim": { "branch": "master", "commit": "213c23ae45a04797572242568d5d51937181792d" },
+  "pathlib.nvim": { "branch": "main", "commit": "57e5598af6fe253761c1b48e0b59b7cd6699e2c1" },
   "plantuml-syntax": { "branch": "master", "commit": "9d4900aa16674bf5bb8296a72b975317d573b547" },
   "plenary.nvim": { "branch": "master", "commit": "b9fd5226c2f76c951fc8ed5923d85e4de065e509" },
-  "range-highlight.nvim": { "branch": "master", "commit": "f54aec737f138e52c187a8bea77b41347fd86f12" },
+  "range-highlight.nvim": { "branch": "master", "commit": "097103da6550c2a34c029971c3d7da63d3fef320" },
-  "rose-pine": { "branch": "main", "commit": "eb3ff49a4f2b4e8b06d27de529e44fa52a60ab8a" },
+  "rose-pine": { "branch": "main", "commit": "cf2a288696b03d0934da713d66c6d71557b5c997" },
   "sherbet.nvim": { "branch": "master", "commit": "5c4166eff70ec551ae0023edfb89141b25cc18c6" },
-  "snacks.nvim": { "branch": "main", "commit": "59c5545e91878c1f6218b032a881832bc98a46f3" },
+  "snacks.nvim": { "branch": "main", "commit": "ad9ede6a9cddf16cedbd31b8932d6dcdee9b716e" },
   "telescope-tabs": { "branch": "vim_ui_select", "commit": "f01bc722582fdcaa58ea37492b382ff109893d95" },
-  "tokyonight.nvim": { "branch": "main", "commit": "2642dbb83333e0575d1c3436e1d837926871c5fb" },
+  "tokyonight.nvim": { "branch": "main", "commit": "cdc07ac78467a233fd62c493de29a17e0cf2b2b6" },
   "v-vim": { "branch": "master", "commit": "1dc1388bafb89072f8349dbd96f9462ae22237cb" },
-  "vim-colors-xcode": { "branch": "master", "commit": "6d449229bf29176448bd06377689d7a8db0d1bee" },
+  "vim-colors-xcode": { "branch": "master", "commit": "2329a3ed092b4f72e9361a94567a5431e36e7d9c" },
   "vim-etlua": { "branch": "master", "commit": "bb2974d0134ce6da60c3be0d82d809976b859c1c" },
   "vim-repeat": { "branch": "master", "commit": "65846025c15494983dafe5e3b46c8f88ab2e9635" },
   "vim-teal": { "branch": "master", "commit": "a416397cf7aad7b03ef53fd3d9847fd764bcbfee" },
-  "vscode.nvim": { "branch": "main", "commit": "cb9df0873c10a21d05362455ae3bb355eadcef6b" }
+  "vlime": { "branch": "master", "commit": "e276e9a6f37d2699a3caa63be19314f5a19a1481" },
+  "vscode.nvim": { "branch": "main", "commit": "aa1102a7e15195c9cca22730b09224a7f7745ba8" }
 }

config/.config/nvim/lua/config/keymap.lua

@@ -18,7 +18,7 @@ setnx('<leader>r', Snacks.picker.registers, 'Search registers')
 setnx('<leader>s', Snacks.picker.spelling, 'List spelling suggestions')
 setnx('<leader>M', Snacks.picker.man, 'Search man pages')
 setnx('<leader>t', require'telescope-tabs'.list_tabs, 'List tabs')
-setnx('<leader>c', Snacks.picker.colorschemes, 'Select colorscheme')
+setnx('<leader>C', Snacks.picker.colorschemes, 'Select colorscheme')
 setnx('<leader>N', Snacks.picker.notifications, 'List notifications')
 
 local neogit = require('neogit')
@@ -33,6 +33,11 @@ setnx('<leader>om', '<CMD>Mason<CR>', 'Open Mason')
 setnx('<leader>oc', '<CMD>cd ' .. vim.fn.stdpath('config') .. '<CR><CMD>Oil .<CR>', 'Open neovim configuration')
 setnx('<leader>og', neogit.open, 'Open (neo)git')
 
+setnx('<leader>cc', '<CMD>CommandExecute<CR>', 'Run shell command')
+setnx('<leader>ct', '<CMD>CommandReopenTerminal<CR>', 'Open shell command terminal')
+setnx('<leader>cl', '<CMD>CommandExecuteLast<CR>', 'Run last shell command')
+setnx('<leader>cs', '<CMD>CommandExecuteSelection<CR>', 'Run selection as shell command')
+
 -- Exit terminal mode with ESC
 set('t', '<Esc>', '<C-\\><C-n>')
 

config/.config/nvim/lua/plugins/util.lua

@@ -44,6 +44,19 @@ return {
         },
     },
 
+    {
+        'vieitesss/command.nvim',
+        lazy = false,
+        version = '*',
+        opts = {},
+    },
+
+
+    {
+        'glacambre/firenvim',
+        build = ":call firenvim#install(0)"
+    },
+
     {
         'brenoprata10/nvim-highlight-colors',
         event = 'VeryLazy',
@@ -53,7 +66,7 @@ return {
     },
 
     {
-        'ggandor/leap.nvim',
+        url = 'https://codeberg.org/andyg/leap.nvim',
         dependencies = {
             'tpope/vim-repeat',
         },
@@ -180,6 +193,9 @@ return {
 
                     { mode = 'n', keys = '<leader>g', desc = '+Git' },
                     { mode = 'x', keys = '<leader>g', desc = '+Git' },
+
+                    { mode = 'n', keys = '<leader>c', desc = '+Compile' },
+                    { mode = 'x', keys = '<leader>c', desc = '+Compile' },
                 },
             }
         end

config/.config/oama/config.yaml

@@ -0,0 +1,83 @@
+## oama version 0.22.0 - 2025-08-29 0290.e419ef10
+## This is a YAML configuration file, indentation matters.
+## Double ## indicates comments while single # default values.
+## Not all defaults are shown, for full list run `oama printenv`
+## and look at the `services:` section.
+
+## Possible options for keeping refresh and access tokens:
+## GPG - in a gpg encrypted file $XDG_STATE_HOME/oama/<email-address>.oauth
+##       (XDG_STATE_HOME defaults to ~/.local/state)
+## GPG - in a gpg encrypted file ~/.local/state/oama/<email-address>.oauth
+## KEYRING - in the keyring of a password manager with Secret Service API
+##
+## Choose exactly one.
+
+encryption:
+    tag: KEYRING
+
+# encryption:
+#   tag: GPG
+#   contents: your-KEY-ID
+
+## Builtin service providers
+## - google
+## - microsoft
+## Required fields: client_id, client_secret
+##
+services:
+  google:
+    client_id: application-CLIENT-ID
+    client_secret: application-CLIENT-SECRET
+  ## Alternatively get them from a password manager using a shell command.
+  ## If both variants are present then the _cmd versions get the priority.
+  ## For example:
+  # client_id_cmd: |
+  #   pass email/my-app | head -1
+  # client_secret_cmd: |
+  #   pass email/my-app | head -2 | tail -1
+  #  auth_scope: https://mail.google.com/
+  # microsoft:
+  #   client_id: 08162f7c-0fd2-4200-a84a-f25a4db0b584 # notsecret
+  #   client_secret: 'TxRBilcHdC6WGBee]fs?QR:SJ8nI[g82' # notsecret
+  #   auth_scope: https://outlook.365office.com/IMAP.AccessAsUser.All
+  #     https://outlook.365office.com/SMTP.Send
+  #     offline_access
+  #   tenant: common
+  #   prompt: select_account
+  #
+  microsoft:
+    # client_id: 08162f7c-0fd2-4200-a84a-f25a4db0b584 # notsecret
+    # client_secret: 'TxRBilcHdC6WGBee]fs?QR:SJ8nI[g82' # notsecret
+    client_id: '9e5f94bc-e8a4-4e73-b8be-63364c29d753'
+    auth_scope: https://outlook.office.com/IMAP.AccessAsUser.All
+      https://outlook.office.com/POP.AccessAsUser.All
+      https://outlook.office.com/SMTP.Send
+      offline_access
+    tenant: common
+    prompt: select_account
+  ## client_secret is not needed for device code flow
+  #  auth_endpoint: https://login.microsoftonline.com/common/oauth2/v2.0/devicecode
+  ##
+  ## client_secret might be needed for other authorization flows
+  #  client_secret: application-CLIENT_SECRET
+  ## auth_endpoint: https://login.microsoftonline.com/common/oauth2/v2.0/authorize
+  #
+  #  auth_scope: https://outlook.office.com/IMAP.AccessAsUser.All
+  #     https://outlook.office.com/SMTP.Send
+  #     offline_access
+  #  tenant: common
+
+  ## User configured providers
+  ## Required fields: client_id, client_secret, auth_endpoint, auth_scope, token_endpoint
+  ##
+  ## For example:
+  # yahoo:
+  #   client_id: application-CLIENT-ID
+  #   client_id_cmd: |
+  #     password manager command ...
+  #   client_secret: application-CLIENT_SECRET
+  #   client_secret_cmd: |
+  #     password manager command ...
+  #   auth_endpoint: EDIT-ME!
+  #   auth_scope: EDIT-ME!
+  #   token_endpoint: EDIT-ME!

config/.emacs.d/plugins/apps.el

@@ -343,6 +343,8 @@
                        (elfeed/add-to-playlist)
                        (mpdel/switch-context 'podcasts)
                        (libmpdel-play)))
+              ("b" . elfeed/show-eww-open)
+              ("B" . elfeed-show-visit)
               ("P" . (lambda () (interactive)
                        (mpdel/switch-context 'podcasts)
                        (libmpdel-play))))
@@ -352,11 +354,14 @@
                        (elfeed/add-to-playlist)
                        (mpdel/switch-context 'podcasts)
                        (libmpdel-play)))
+              ("B" . elfeed-search-browse-url)
+              ("b" . elfeed/search-eww-open)
               ("P" . (lambda () (interactive)
                        (mpdel/switch-context 'podcasts)
                        (libmpdel-play))))
   :config
   (setq-default elfeed-search-filter " ")
+  (setq elfeed-log-level 'debug)
   (setq elfeed-feeds
         '( ("https://phaazon.net/blog/feed")
            ("https://irreal.org/blog/?feed=rss2")
@@ -375,6 +380,22 @@
            ("https://www.dailywire.com/feeds/rss.xml")
            ("https://feeds.simplecast.com/6c2VScgo")
            ("https://feeds.simplecast.com/pp_b9xO6")))
+  (defun elfeed/show-eww-open (&optional use-generic-p)
+   "open with eww"
+   (interactive "P")
+   (let ((browse-url-handlers '(("https:\\/\\/www\\.youtu\\.*be." . browse-url-mpv)
+                                (".*" . #'eww-browse-url))))
+     (elfeed-show-visit use-generic-p)))
+
+  (defun elfeed/search-eww-open (&optional use-generic-p)
+    "open with eww"
+    (interactive "P")
+    (let ((browse-url-handlers '(("https:\\/\\/www\\.youtu\\.*be." . browse-url-mpv)
+                                 ("." . #'eww-browse-url))))
+      (elfeed-search-browse-url use-generic-p)))
+  (defun browse-url-mpv (url &optional single)
+    (start-process "mpv" nil "mpv" (shell-quote-argument url)))  
+
   (defun elfeed/add-to-playlist ()
     (interactive
       (let* ((entry (if (eq major-mode 'elfeed-show-mode)

config/.scripts/rfv.sh

@@ -1,4 +1,4 @@
-rg -uu --color=always --line-number --no-heading --smart-case -H "${*:-}" | tr -d '\r' |
+/usr/bin/rg . . --color=always --line-number --no-heading --smart-case -H "${*:-}" | tr -d '\r' |
   fzf-tmux --cycle -p 80%,90% --ansi \
       --color "hl:-1:underline,hl+:-1:underline:reverse" \
       --delimiter : \